FAQ

How To Troubleshoot Tripping Or Alarms?

2026-09-23 21:07:21 · Author: ELEJG

Key Points: First, confirm whether the device was tripped by an overload, short circuit, ground fault, overvoltage or undervoltage, or an arc fault. Verify the trip settings against the circuit load, and reset only after the fault has been cleared. For details, see the Technical Support and FAQ section, or contact our after-sales service.

First, determine whether the trip was caused by an overload, short circuit, ground fault (leakage current), overvoltage/undervoltage, or an arc fault. Verify the trip settings against the line load, and reset only after the fault has been cleared. For details, refer to the Technical Support & FAQ section or contact our after-sales service.

Previous: What Should I Pay Attention To During Installation?

Next: How To Obtain The Product Manual PDF?

Technical Support

Latest News

How To Choose A Dormitory Power Limiter? Per-Unit And Total Power Settings2026-10-24
How Can I Find Reliable Suppliers In China?2026-10-23
Why Did The Parameter Settings For The Control And Protection Switch Not Take Effect?2026-10-23
How To Match A Control And Protective Switching Device To Motor Power?2026-10-11
What Product Does Jgfh-63 Belong To? Terminology For Current-Limiting Electrical Fire Protection Devices2026-10-10
Jgkb-45 Triple-Display Control And Protection Switch: Several Technical Questions To Confirm Before Selection2026-09-13
Dormitory Power Limiting, Distribution Box Retrofits, And Charging Facilities: Configuration Differences And Interface Checklist For Three-Phase Four-Wire Over/under-Voltage Protection2026-09-12
Jgiv-63s Intelligent Current-Limiting Overvoltage And Undervoltage Protector: A Practical Guide To First Power-On, Fault Reset, And Safe Wiring2026-09-11
Over/under Voltage Protector Setup Faqs: How To Enter The Menu, Adjust Thresholds, And Save?2026-09-10
What Is A Current-Limiting Fire Alarm Protector?2026-09-08